狠狠噜天天噜日日噜

    <tbody id="tgcte"></tbody>
    <th id="tgcte"></th>
    <dd id="tgcte"></dd>
      <dd id="tgcte"><track id="tgcte"></track></dd>
      <dd id="tgcte"></dd>

      <button id="tgcte"></button>
      1. <rp id="tgcte"><acronym id="tgcte"><input id="tgcte"></input></acronym></rp>
        <rp id="tgcte"></rp>
        <tbody id="tgcte"><noscript id="tgcte"></noscript></tbody>

        YongLian CNC

        Industry knowledge

        CNC wire bending machine operation process

        Time:2019-03-01 Source:未知
        CNC wire bending machine can be used for bending winding of spring, steel wire, iron wire, copper wire, metal material, etc. Below, Yonglian CNC introduces the operation rules of CNC wire bending machine.
         
        1. First, turn on the power, turn on the key switch on the control panel, and then press the oil pump to start.
         
        2, stroke adjustment, CNC wire bending machine must pay attention to adjust the stroke, must test the car before bending. When the upper die of the bending machine goes down to the bottom, it must ensure a gap of plate thickness, otherwise it will cause damage to the mold and the machine. The adjustment of the stroke is also equipped with electric quick adjustment and manual fine adjustment.
         
         
        3, the choice of bending slot, generally choose the slot thickness of 8 times the thickness of the plate. For a sheet with a thickness of 4 mm, a notch of about 32 is required.
         
        4. The back gauge adjustment of the CNC wire bending machine generally has electric quick adjustment and manual fine adjustment.
         
        5. Press the foot switch to start bending. The bending machine is different from the shearing machine. You can release it at any time. When you release the foot bending machine, it will stop and then step on.
         
        Yonglian CNC focuses on the development, production and sales of various CNC equipment. The main products are spring machine, compression spring machine, computer spring machine, camless spring machine, wire forming machine, CNC wire bending machine, etc. For the processing of various wire products, welcome to consult.
        狠狠噜天天噜日日噜

          <tbody id="tgcte"></tbody>
          <th id="tgcte"></th>
          <dd id="tgcte"></dd>
            <dd id="tgcte"><track id="tgcte"></track></dd>
            <dd id="tgcte"></dd>

            <button id="tgcte"></button>
            1. <rp id="tgcte"><acronym id="tgcte"><input id="tgcte"></input></acronym></rp>
              <rp id="tgcte"></rp>
              <tbody id="tgcte"><noscript id="tgcte"></noscript></tbody>